U tube heat exchangers, each tube is bent into a U-shaped, both ends are fixed on the same tube sheet, each tube can be freely retractable, thus solving the problem of thermal compensation. The tube length...
1. The stainless steel storage tank has strong corrosion resistance, and it is not corroded by the residual chlorine in the outside air and water. Each ball tank is shocked by super pressure test and...
China air storage tank need to be checked regularly. It is best to have a hydrostatic test for the pipeline for two years. The safety valve and pressure gauge on the tank body should also be checked once...
1, U tube heat exchanger the total heat transfer coefficient is large, because the surface of the board is pressed into ripples or grooves, and turbulence can be achieved at low flow rate.2, the compact...
Asme oxygen storage tank is mainly used to meet the short-term increase in flow requirements, while the system pressure is balanced, the use of different processes, oxygen storage tank configuration...
Absorb tower for absorption operation.With the difference in solubility of the gas mixture in the liquid absorbent, the easily soluble components are dissolved in the absorbent and the process of separation...
The filter separator is based on the GJB610-88, GJB689-89 standard production technical indicators and meet API1581III American Petroleum Institute standards, while implementing GB150-1998 national pressure...
The shell side of the tube-sheet heat exchanger is difficult to clean, and there is a temperature difference stress. When the average temperature difference between the two hot and cold fluids is large,...
1). Before the tank is sterilized, it is necessary to check the height of the liquid surface, and it is required that all the electrodes are not below the liquid surface.2). Be sure to check that the...
